Low Profile and Supper Low Profile, Printed Circuit Mount Transformers
Ascend Electronics®’ Low Profile Power transformers are ideal for low-height and critical pc board power supplies in semi-conductor control and instrumentation applications. The dual bobbin construction accomplishes this. In addition, the design provides high isolation between primary and secondary windings and from either of these to the core. HiPot test is for these transformers 4500VAC RMS.
These transformers are ideal where minimum height is an advantage and international safety requirements must be met. These transformers are fully encapsulated and wound with unique insulating techniques to meet international safety requirements.
Product Metrics (Standard Component)
| Power: | 2.5; 6; 12; 24; 48 [VA] |
| Dielectric: | Strength: min 4500 VRMS HiPot |
| Primary: | Dual primaries, 115/230 VAC @ 50/60/400 Hz |
| Secondary: | Series or Parallel for Symmetrical Secondary output voltage or Two different Secondary Voltages for Asymmetrical Type |
| Electrostatic Shield: | Not necessary, split bobbin construction |
| Magnetic Field: | Reduced magnetic radiation |
| Standard output Voltages | |
| Symmetrical Secondary Voltage Vsec1 = Vsec2 | 3.8/3.8; 5.5/5.5; 10/10; 12.6/12.6; 16/16; 20/20; 24/24; 30/30; 36/36; 56/56; 88/88; 120/120; 230/230 [Volt] |
| Asymmetrical Secondary Voltage Vsec1 ≠ Vsec2 [Volt/Volt] Each Secondary has ½ of the power rating 70 combinations per power rating. | 3.8/5; 3.8/10; 3.8/12.6; 3.8/16; 3.8/20; 3.8/24; 3.8/30; 3.8/36; 3.8/56; 3.8/88; 3.8/120; 3.8/230; 5.5/10; 5.5/12.6; 5.5/16; 5.5/20; 5.5/24; 5.5/30; 5.5/36; 5.5/56; 5.5/88; 5.5/120; 5.5/230; 10/12.6; 10/16; 10/20; 10/24; 10/30; 10/36; 10/56; 10/88; 10/120; 10/230; 12/16; 12/20; 12/24; 12/30; 12/36; 12/56; 12/88; 12/120; 12/230; 20/24; 20/30; 20/36; 20/56; 20/88; 20/120; 20/230; 24/30; 4/36; 24/56; 24/88; 24/120; 24/230; 30/36; 30/56; 30/88; 30/120; 30/230; 36/56; 36/88; 36/120; 36/230; 56/88; 56/120; 56/230; 88/120; 88/230; 120/230 [Volt] |
